AMT Datasouth Fastmark M1 Betriebsanweisung PDF herunterladen (Seite 399)

Avery Dennison Printers

Label Options Section

Label Inverse

Inverts the entire label, black prints as white, white

space prints as black.

Printer Overrides Section

These settings override the Print Options Section in Printer Specific Options.

Print Mode

n Batch Mode - The whole surface of the label is printable.

n Normal 1:1 Mode - The first 18 mm of the label is not printable. The printing on the label is

automatically shifted past the empty space.

n Real 1:1 Mode - Total surface of the label is printable, and the label is retracted after each

label.

Character Set

Several printer languages are available that can print international characters that are not available

in the U.S. character set. See the appendix section of your printer guide to find the corresponding

hex codes used to select the desired character

Gap Offset

This command is for determining the beginning of the label when labels are printed with irregular

gaps.

Cut Interval This sets the number of labels to be printed before the stock is cut.

Dispense

Position

This adjusts the distance the label is fed after printing.

Avery RFID Options Section

These options apply to Avery RFID printers.

Use Label

or Printer

Options

This setting determines whether to use the options set in this section or those set in the Avery RFID

Printer Specific Options. From this dialog, label setup options can be set when the Use Label RFID

Options setting is selected.

RFID Tag

Type

Select one of the supported tag types: Autodetect, EPC Class 0, Alien EPC Class 1, and Philips UCODE

EPC 1.19 tags.

Note: If you are using an Avery RFID printer to print your label, from the Avery RFID PSO dialog, set RFID Tag

Type to Autodetect which automatically determines the tag type. Otherwise, you must set the tag type from the

Avery PSO dialog to match what is set in the Block Configuration dialog.

Tag Position From Start of Label This is the distance of the chip from the leading edge. This defaults to 60 mm.

Number of Write Retries per Label This setting determines the number of times to retry in case of initial failure.

Number of Labels to Retry in Case

of Tag Access Failure

This setting determines the number of retries before displaying an error

message and requiring user intervention.

Verify

This is set to Off, by default. When Verify is enabled, it detects whether the tag

about to be written to is an Alien tag or not.

Avery Printer Specific Options

Printer Specific Options (PSOs) can be accessed by clicking Options while configuring the printer or by

selecting the printer from the Device Configuration grid and clicking Options.

Loftware LabelManager Version 10.1.1 User's Guide

399

1 2 ... 394 395 396 397 398 399 400 401 402 403 404 ... 531 532

Kommentare zu diesen Handbüchern

Keine Kommentare

AMT Datasouth Fastmark M1 Betriebsanweisung Seite 399

Kommentare zu diesen Handbüchern