AMT Datasouth Accel-7450 Betriebsanweisung PDF herunterladen (Seite 27)

- 27 -

PRINT DIR

Select the printing direction of the print head: unidirectional, bidirectional or Auto

selected via software.

HIGH DENSITY

After selecting this function, printing definition will be enhanced while the print

speed is reduce.

QUIET MODE

Disable or enable the low noise function. When this function is on, print speed will

be reduced.

AUTO LF

If this function is on, the printer will advance the paper one line automatically after

receiving every carriage return instruction.

Specify the wait time between installing the cut sheet into the paper guide and

when it is fed into the printer. Choose to wait specify time or press LF/FF key to

feed paper.

EJECT

Specify paper eject direction when loading paper from front.

PIN SWITCH

After selecting this function, the printer will switch different pins to print table line

automatically.

MARGIN DETECT

After selecting this function, the printer will detect the paper edge automatically

after feeding paper, and start to print from the position according to the left margin

setting.

SKEW DETECT

After selecting this function, the printer will auto detect paper skew when feeding

cut sheet paper. If the slant degree is beyond the set parameter, the printer will

eject paper automatically.

BAUD RATE

Specify the printer serial data transfer rate.

PARITY

Specify the parity bit for serial data transfer.

DATA BITS

Specify the serial data bits.

STOP BITS

Specify the serial data transfer stop bit.

PROTOCOL

Specify the protocol of printer serial data transfer as software control (XON/XOFF)

or hardware control (DTR).

Select the broken pin. The printer will automatically replace it with other pin to

print.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 37 38

Keine Kommentare

AMT Datasouth Accel-7450 Betriebsanweisung Seite 27